Direct pressure leak detector
+
  • Direct pressure leak detector

Direct Pressure Leak Detector Instructions

This series of instruments uses a self-developed dedicated control board for control and calculation. Coupled with high-precision sensors within the instrument, it calculates the leakage of the product and compares it with the set upper and lower limits to determine whether the tested product is qualified. 
◇Features high precision, fast response, and a simple and clear interface;

◇Equipped with a volume testing program, it can automatically calculate the volume of the product, reducing measurement errors caused by manual estimation; 
◇Uses a self-developed control board and dedicated control and testing program, with high precision and strong anti-interference capability;

◇Provides a selection of various pressure and leakage rate units; 
◇High-definition large screen, intuitive curves, making the interface simple and clear; 
◇Equipped with a report page, which can statistically analyze and save the test results, storing up to 100,000 sets of data;

◇The instrument is equipped with a USB interface for downloading and storing test results; 
◇Supports Chinese/English interfaces to suit different customer groups; 
◇Equipped with a 485 interface supporting Modbus protocol, allowing for remote control, setting, and monitoring of tests;

◇Optional multi-channel configuration, supporting up to 4 workstations for non-interfering testing; 
◇Equipped with an internal filter, greatly extending the service life of the instrument; 
◇Rich external control interfaces allow the instrument to be embedded in other systems to meet the needs of automated control;

 

Technical Parameters

IndexParametersIndexParameters
Equipment NameDirect Pressure Airtightness Leak DetectorTesting Accuracy±0.25%FS
Equipment ModelUM-303-Test Pressure Display0.1KPa
Testing PrincipleDirect Pressure MethodTime Accuracy0.1S
Test MediumDry, clean compressed air or nitrogenReport CapacityApproximately 100,000 sets
Test Workstations1/2/3/4 workstations optionalGas Source Pressure0.1-2.5MPa (must be higher than the test pressure)
Pressure Range10-100KPa (customizable)Dimensions220(W)*245(H)*350(D)mm
Maximum Withstanding Pressure0.8MPaPower Supply220VAC±10%、50HZ
Flow Display Accuracy0.1pa or 0.001mL/minNet WeightApproximately 8.5Kg
Differential Pressure Range1000Pa (customizable)Standard Accessories1.5-meter test tube, 3-meter gas source tube, one external control switch

Keywords:

Direct pressure leak detector
+
  • Direct pressure leak detector

Direct pressure leak detector

This series of instruments uses a self-developed dedicated control board for control and calculation. Coupled with high-precision sensors within the instrument, it calculates the leakage of the product and compares it with the set upper and lower limits to determine whether the tested product is qualified.

Product Category:


Online Message

*Note: Please fill in the information accurately and keep the communication open. We will contact you as soon as possible.

Submit